DOWSIL Sylgard 184 Silicone Elastomer Kit 0.5 Kg. (Polydimethylsiloxane, PDMS) Elastomer Encapsulation Kit.
2-part, clear/transparent, 10:1, Room Temperature (RT) and heat cure, good strength, good flame resistance, UL and Mil Spec. Mixable by hand or by automatic mixing/dispensing method.
184 Silicone Elastomer Clear is a two component, room temperature and heat curing encapsulant that is used as protective coating for. It provides flowability, flame resistance, and good dielectric properties. POT LIFE AND CURE RATE: Cure reaction begins with the mixing process.
Initially, cure is evidenced by a gradual increase in viscosity, followed by gelation and conversion to a solid elastomer. Pot life is defined as the time required for viscosity to double after Parts A and B (base and curing agent) are mixed and is highly temperature and application dependent. Please refer to the data table. NOTE: DOWSIL SYLGARD 184 is the new name for the former Dow Corning Sylgard 184. Dow Corning is now fully owned by Dow Chemical Corporation and the Dow Corning name has been eliminated from the products.
All former Dow Corning products are now identified by Dow Chemical under the DOWSIL or MOLYKOTE trademarks. The item "NEW DOWSIL Sylgard 184 Solar Cell Panel Silicone Elastomer Encapsulation Kit" is in sale since Thursday, June 7, 2018. This item is in the category "Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Solar Panels". The seller is "pps-auctions1" and is located in Cedar Grove, New Jersey.This item can be shipped to North, South, or Latin America, all countries in Europe, Japan, Australia.